Fresco logic FL2000 – VGA
USB 3.0 a VGA steren driver win 10
Recently we found some crashes on Win10 anniversary update OS with certain inbox display driver and found out that the WDDM architecture was updated from 2.0 to 2.1.
Starting from version 2.0.33043.0, the complete support of WDDM2.1 is added. Make sure you download the latest driver.
Downloads
Which driver do I need?
USB 3.0 to VGA/HDMI Driver
FL2000-2.1.34054.0 (Windows)
USB 3.0 to VGA/HDMI FL2000 Driver FL2000-2.1.34054.0
USB 3.0 to VGA/HDMI Driver
(FL2000) ver 2.1.34
USB 3.0 to VGA/HDMI FL2000 Driver FL2000-2.1.34054.0
USB 3.0 to VGA/HDMI Driver
(FL2000) ver 2.1.33
USB 3.0 to VGA/HDMI FL2000 Driver FL2000-2.1.33788.0
Starting from version 2.1.33350.0, Indirect Display Driver is supported, which aims to eliminate lots of compatibility issues. Make sure you upgrade your driver to the latest if you are running win10 RS1 OS or above.
Installer Error Message “thin2000 usb display adaptor setup ended prematurely”
This error often occurs when you are installing new driver (eg. V2.0 or above) while you have old driver installed (V1.0), and the old driver wouldn’t get uninstalled.
Here is step-by-step procedure to uninstall your previous driver.
1. Locate your original driver CD where you would find “FLUSBVGA-1.1.329.EXE” (for example).
2. Copy the FLUSBVGA-1.1.329.EXE to C:\ .
3. Invoke cmd.exe with “administrator privilege”. type “cd \”, “dir FLUSBVGA*.EXE”. You should see the file in the cmd window output.
4. type “FLUSBVGA-1.1.329.EXE /extract”. You should see 2 msi files extracted. type “dir *.msi”. The 32bit MSI file should look like this xxxxx.msi , while the 64bit msi should be xxxxx.x64.msi. The xxxxx denote random numbers.
5. If your OS is 64bit , type “msiexec.exe /x xxxxx.x64.msi”. Otherwise type “msiexec.exe /x xxxxx.msi”. At this step ,you should see uninstaller window shows up.
6 During step 5, you will be required to reboot your system. After that, you can install the latest driver.
If the above still fails, send us the step by step cmd.exe window screen dump (by ALT-PrintScreen Key, and save it to a bmp file).
USB 3.0 Controller not working or disappears when devices are connected.
This is usually caused by lack of power to the card. Many of the cards using our USB 3.0 host controllers have a power connector that needs to be connected to the system power supply.
If a power cable is not connected then the controller may show up in Windows Device manager but disappear when any USB devices are connected
to the controller.
Other possible symptoms:
Controller doesn’t appear in Device Manager.
Controller appears with a yellow triangle in Device Manager.
Controller appears in Device Manager but disappears when an
y device is plugged in.
